Take on concrete floors, confined spaces, and light to medium demolition work with the APT M117. This 30-pound paving breaker is built for power and control.

Its lightweight design makes it easy to handle without sacrificing the force you need to get the job done.

SPECIFICATIONS

New Part #	1280582251	1280583301
Old Part #	5199	5200
Chuck Size	⅞” Hex x 3 ¼”	1" Hex x 4 ¼”
Bore Diameter	1 ¾” 1 ¾”
Stroke	3 ⅜” 3 ⅜”
Blows per Minute	1,850 1,850
CFM @ 90 PSI	34-38 34-38
Weight	33 lbs 33 lbs
Length	21 ¾” 21 ¾”
Air Inlet Size	⅜” Male NPT ⅜” Male NPT

Standard Features

Steel automatic valve
Drop-forged, steel handle
Built-in automatic oiler
Rubber handle grips
Latch-type retainer
Swivel hose connection
Noise-dampening mufflers available
Four-bolt backhead
Replaceable chuck bushing (except for model 140/140A)

Air Pressure

The recommended air requirement for the operation of APT tools is 90 psi (6.2 bar). Lower air pressure will decrease power, too high a pressure will increase unwanted stresses in the tool. For proper CFM ratings, please refer to the specification charts above.

Hose Size

APT recommends the use of at least 1⁄2” inside diameter or larger hoses to assure sufficient air flow to the tool. For portable compressor hose and longer lengths, 3⁄4 “ hose is recommended. Keep the overall length of the hose to a minimum to prevent pressure loss at the tool.

Connecting Hoses

Hoses should be rated for a minimum of 250 psi (17.2 bar). Before connecting the air hose to the tool, check the tool inlet connector to be sure it is clean and free of dirt or debris. Keeping dirt and debris from entering the tool will assure long and satisfactory operation.

American Pneumatic Tools

American Pneumatic Tools M117 Paving Breaker